Tightening Torques (Transmission G86/20)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION (TRANSMISSION G86/20)
| Location | Thread | Tightening torque | |
|---|---|---|---|
| Diagonal brace to carrier inner side section and body | M10 | 65 (48) | Nm (ft.lb) |
| Rear cross member (V strut) to sheetmetal cross member and body | M10 | 65 (48) | Nm (ft.lb) |
| Stabilizer to carrier side section | M8 | 23 (17) | Nm (ft.lb) |
| Stabilizer mount to stabilizer | M10 | 46 (34) | Nm (ft.lb) |
| Drive shaft to transmission flange | M10 | 81 (60) | Nm (ft.lb) |
| Transmission support to transmission | M12 | 85 (63) | Nm (ft.lb) |
| Hydraulic mount to carrier side section | M8 | 23 (17) | Nm (ft.lb) |
| Clutch slave cylinder to transmission | M8 | 23 (17) | Nm (ft.lb) |