LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Clutch, Controls) >> Clutch Boost Spring: Allocation And Grease Specification >> Grease Specification >> BOXSTER Up To Mod. `98 (Boost Spring Bracket Cannot Be Unscrewed) >> Standard Boost Spring

Standard Boost Spring

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Push rod open on one side. Component not coated.

Grease pin for boost spring with mating bearing on the boost spring push rod, the boost spring bearing and the bearing pins on the boost spring with Optimol, Optitemp LG 2, part No. 000.043.203.37. First remove old grease with solvent naphtha.

scientia non olet · About LEMON Manuals