Vehicle hand-over
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
The PCM2 is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over bar), the PCM2 must be activated with the Porsche System Tester II 9588.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select Special functions in the Vehicle type menu and confirm with the ">>" key.
- Select Vehicle hand-over in the function selection Special function and confirm with the ">>" key.
- Follow the instructions of the Porsche System Tester II 9588.