LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Radio, Navigation, Telephone, Pcm & Park Assistant - Diagnosis) >> Control unit function - external BOSE amplifier >> MOST component check

MOST component check

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

The following checks are available under this menu item:

NOTE:
  • The engine must not be started during the automatic check. Follow the instructions of the Porsche System Tester II 9588.

Test sequences are automatic. The test results are displayed.

COMPONENT CHECK MENU ITEM - FUNCTION (EXTERNAL BOSE AMPLIFIER)

Menu item Function
  • MOST system check
 An automatic MOST system check can be carried out using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
  • Select PCM in the Control units selection menu and confirm with the ">>" key.
  • Select MOST component check in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key.
  • Select MOST system check in the CDR23 MOST component check menu and confirm with the ">>" key.
  • The test result is displayed.

Before replacing control units, the optical waveguide and the ring break diagnosis line must be checked.
  • Ring break diagnosis
 An automatic ring break diagnosis can be carried out using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
  • Select PCM in the Control units selection menu and confirm with the ">>" key.
  • Select MOST component check in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key.
  • Select MOST ring break diagnosis in the Boxster (986) CDR23 MOST component check menu and confirm with the ">>" key.
  • The test result is displayed.

Before replacing control units, the optical waveguide and the ring break diagnosis line must be checked.
  • Ring break diagnosis line
 An automatic check of the ring break diagnosis line can be carried out using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
  • Select PCM in the Control units selection menu and confirm with the ">>" key.
  • Select MOST component check in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key.
  • Select MOST ring break diagnosis line in the Boxster (986) CDR23 MOST component check menu and confirm with the ">>" key.
  • The test result is displayed.

Before replacing control units, the optical waveguide and the ring break diagnosis line must be checked.
COMPONENT CHECK MENU ITEM - FUNCTION (EXTERNAL BOSE AMPLIFIER)

Menu item Function
  • Optical performance check
 The transmission errors can be read out using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
  • Select PCM in the Control units selection menu and confirm with the ">>" key.
  • Select MOST component check in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key.
  • Select Optical performance check in the Boxster (986) CDR23 MOST component check menu and confirm with the ">>" key.
  • The test result is displayed.

Before replacing control units, the optical waveguide and the ring break diagnosis line must be checked.
scientia non olet · About LEMON Manuals