Extended identification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Additional data present in the control unit can be read out using this menu item.

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
Select PCM in the control modules selection and confirm with the ">>" key.
Select External BOSE amplifier in the PCM2 function selection and confirm with the ">>" key.
Select the Identification menu item and press the ">>" key
Diagnosis software number; PCM2 part number. appears on the display.
Confirm PCM2 GW extended identification with the "F8" key or the ">>" key.

The following data can be read out:

Data record code
Diagnosis software number
Hardware version
Porsche Part No.
Serial No.
Software version
BOSE software version
Workshop or tester ID