Replacing an optical waveguide

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

When working on the optical waveguide, attention must be paid to the correct fitting of each diode (transmitter and receiver diodes), otherwise function cannot be guaranteed.

When working on optical waveguides, the instructions in assembly must be observed. Refer to OPTICAL FIBER (LWL) - MOST BUS .

Fit the diode with the white moulding (Transmitter diode) on the locking element.
Fit the diode with the black moulding (Receiver diode) opposite the locking element.