LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Radio, Navigation, Telephone, Pcm & Park Assistant - Diagnosis) >> CDR23 control module function >> Input signals

Input signals

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

The following queries can be run using this menu item:

NOTE: Deactivate the automatic traffic announcement before performing the diagnosis on the CDR23. If this is not done, the system will crash.
INPUT SIGNAL MENU ITEM - FUNCTION (CDR23 CONTROL MODULE)

Menu item Function
  • Key code
 Under this menu item, the function of the CDR23 operating buttons can be checked.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
  • Select PCM in the Control units selection menu and confirm with the ">>" key
  • Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select Input signals in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select Key code  in the Boxster (986) CDR23 input signals menu and confirm with the ">>" key
  • By operating the buttons of the CDR23, the correct function of each key code is displayed
  • Status of the optical performance check
 Using this menu item, the result of the optical performance check can be read out.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
  • Select PCM in the Control units selection menu and confirm with the ">>" key
  • Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select Input signals in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select Status of optical performance check  in the Boxster (986) CDR23 input signals menu, mark with the ">" key and confirm with the ">>" key
  • The result can be read out
  • Tuner parameters
 Using this menu item, each country coding of the tuner can be read out.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
  • Select PCM in the Control units selection menu and confirm with the ">>" key
  • Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select Input signals in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select Tuner parameters  in the Boxster (986) CDR23 input signals menu using the ">" key and confirm with the ">>" key
  • In the Boxster (986) CDR23 tuner parameters menu the current country code is displayed
INPUT SIGNAL MENU ITEM - FUNCTION (CDR23 CONTROL MODULE)

Menu item Function
  • GAL (noise-dependent loudspeaker boost - NLB)
 Using this menu item, the codes NLB value can be read out.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition
  • Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
  • Select PCM in the Control units selection menu and confirm with the ">>" key
  • Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select Input signals in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
  • Select and mark NLB (noise-dependent loudspeaker boost  ) in the Boxster (986) CDR23 input signals menu with the ">" key and confirm with the ">>" key
  • In the Boxster (986) CDR23 noise-dependent loudspeaker control menu the current coded value is displayed
scientia non olet · About LEMON Manuals