Extended identification
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Additional data present in the control unit can be read out using this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
- Select PCM in the control modules selection and confirm with the ">>" key
- Select CDR23 in the PCM2 function selection and confirm with the ">>" key
- Select the Identification menu item and press the ">>" key
- 6 Diagnosis software number; PCM2 part number. appears on the display
- 7 Confirm PCM2 GW extended identification with the "F8" key or the ">>" key
The following data can be read out:
The following data can be read out:
- CRIN (Car Radio Identification Number)
- Date of ECU Manufacturing (YYYY;MM;DD)
- Repair Shop Code or Tester Serial Number
- System Supplier ECU Hardware Number (cw, year)
- System Supplier ECU Hardware Version Number
- System Supplier ECU Software Number (cw, year)
- System Supplier ECU Software Version Number
- Vehicle Manufacturer Diagnostic Index
- Vehicle Manufacturer ECU Hardware Number
- VIN (Vehicle Identification Number)