9605 Telephone/telematics: Diagnosis/troubleshooting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

DIAGNOSIS/TROUBLESHOOTING - 9605 TELEPHONE/TELEMATICS

Work instruction			Display OK	If not OK
1	Read out telephone fault memory	Connect and start the Porsche System Tester II 9588 and switch on the ignition Select vehicle type Boxster 986 and start the automatic control module search In the Control units menu, select PCM2 Using the selection button, click Telephone in the Function selection menu and start it with the ">>" key Using the selection button, click Fault memory in the Telephone function selection menu and start it with the ">>" key Read out fault memory Erase fault memory Remove ignition key and switch on ignition again Read out fault memory	-> End	Fault code is displayed Step 2
2	Replace telephone control module		-> End