8003 Pcm2 - MMI: Diagnosis/troubleshooting
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS/TROUBLESHOOTING - 8003 PCM2 - MMI
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out the PCM2 MMI fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket, start it and switch on the ignition
- Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
- Select PCM in the Control units menu and confirm with the ">>" key
- Select PCM2 MMI in the Boxster (986) PCM2 function selection and confirm with the ">>" key
- Select Fault memory in the Boxster (986) PCM2 MMI function selection and confirm with the ">>" key
- Read out fault memory
- Erase fault memory
- Remove ignition key and switch on ignition again
- Read out fault memory
- Extract ambient data, press the ">>" key
|
-> End |
Fault code is displayed
Step 2 |
| 2 |
Replace PCM2 |
-> End |
- |