LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine) >> Removing And Installing Pistons >> Fitting Pistons On Cylinder Bank 4 - 6 >> Tightening Sequence:

Tightening Sequence:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SEQUENCE - BELT PULLEY

Initial tightening 50 Nm (37 ft.lb.)
Final tightening 1 x 90° turn
scientia non olet · About LEMON Manuals