LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine) >> Removing And Installing Hydraulic Valve For Camshaft Adjustment - Engine Installed, As Of My 2003 >> Tightening Torques

Tightening Torques

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - HYDRAULIC VALVE FOR CAMSHAFT ADJUSTMENT, AS OF MY 2003

Location Thread Tightening torque (Nm) (ft.lb)
M6 pan-head screws (hexagon socket a/f 5) sheetmetal bracket M6 10 (7.5)
Wheel bolt M14 x 1.5 130 (96)
scientia non olet · About LEMON Manuals