LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine) >> Removing And Installing Cylinder Head Covers - Engine Installed, As Of My 2003 >> Notes

Removing And Installing Cylinder Head Covers - Engine Installed, As Of My 2003: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Engine type M 96/23 and M 96/24

CAUTION:
  • When working on the engine, absolute cleanliness is essential! Lay removed engine parts on a clean base and cover them without fail. Even the smallest particles of dirt can block up oil bores!
  • The engine may no longer be turned at the crankshaft after the cylinder head cover has been removed!
scientia non olet · About LEMON Manuals