LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine) >> Engine, Lubrication >> Removing And Installing Oil Extraction Pumps >> Removal

Removing And Installing Oil Extraction Pumps: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

At each cylinder head, undo 4 hexagon-head bolts fastening the oil extraction pump.

NOTE:
  • After removing the oil extraction pumps, do not lay them on the drivers.


At each cylinder head, undo 4 hexagon-head bolts fastening the oil extraction pump.

NOTE:
  • After removing the oil extraction pumps, do not lay them on the drivers.
scientia non olet · About LEMON Manuals