LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine) >> Engine, Crankcase >> Disassembling And Assembling Crankcase Halves, Engine M96/20, M96/21, M96/22 >> Tightening Torques

Tightening Torques

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - CRANKCASE HALVES

Location Thread Tightening Torque Nm (ft.lb)
Fastening screw for bearing housing M9 x 150 22 (16)
Fastening screw for bearing housing M9 x 94 22 (16)
Screw plug for piston pin assembly bore M27 x 2 80 (59)
Crankcase half threaded part M6 x 30 13 (9.5)
scientia non olet · About LEMON Manuals