Removing Rear Wiring Harness
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery and cover terminal or battery.
- Undo combination wire in the area of the rear wheel housing. Remove lining for rear wall of the convertible top compartment
- Disconnect the plug connections
- Detach control unit and retaining bracket for the plug connections on the rear wall of the convertible top compartment and expose the combination wires.
- Carefully remove insulating tape from the combination wire as far as plug connector X 2/2 (do not damage any other wire).