LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Wiring) >> Repair Of Main Wiring Harness >> Removal

Repair Of Main Wiring Harness: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Take off cover of battery and radiator tank.
  2. Disconnect the battery and cover terminal or battery.
  3. Remove front wheel housing liner. Undo cable ties in the area of the wheel housing, and remove combination wire.
  4. Carefully remove insulating tape from the combination wire in the area of the disconnection point and cut the old combination wire before the exit to the wheel housing (do not damage any other wires).