LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Wiring) >> Measurement Of Closed-Circuit Current >> Preparations On The Vehicle >> Measurement >> Reading Off The Measuring Range As Of My '02:

Reading Off The Measuring Range As Of My '02:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
MEASURING TIME RANGE

From to mA
0 min 5 min up to approx. 950
6 min 15 min up to approx. 900
16 min 20 min up to approx. 750
21 min 60 min up to approx. 50
61 min until the battery is empty up to approx. 30
CONTROL MODULE CLOSED-CIRCUIT CURRENT MEASUREMENT

Control module Equipment Closed-circuit current in mA
    up until MY '01 as of MY '02
Generator Standard 0,7 0,5
DME Standard 0,4 0,3
Instrument cluster Standard 5,4 1,4
Immobilizer/central locking Standard 6,5 13
Installing passenger compartment monitoring/tilt sensor M-No. 534 5,5 6,6
Power windows, front Standard 1,0 1,1
Convertible-top control module Standard 3 0,5
Tiptronic(1) M-No. 249 0,4 0,4
ABS Standard   0,1
PSM     0,1
Radio   1,0 1,0
Removing M-No. 692 1,0 0,8
Amplifier, Audio M-No. 490 1,0 0,3
Information system Navi M-No. 662 1,0 1,2
Navi computer     0,7
PCM2 as of MY '03     2,8
MOTOROLA telephone preparation M-No. 614 3,0  
NOKIA telephone preparation M-No. 618 1,0  
Telephone as of MY '03     0,2
Seat memory, both M-No. 537 1,0 1,6
Climatronic M-No. 573   0,03
Standard production vehicle total approx. 17 approx. 17
Additional equipment total approx. 15 approx. 13
Maximum equipment total approx. 32 approx. 30
(1) After the battery has been disconnected, terminal 15 must have been connected to the control unit at least once.