LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing/Installing Control Module For Automatic Headlight Beam Adjustment >> Removal

Removing/Installing Control Module For Automatic Headlight Beam Adjustment: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove footwell bulkhead and right air guide.
  2. Undo control module from below (2 sheetmetal screws). Unlock the electrical plug connection and take out control module.
    Fig 1: Locating Control Module For Automatic Headlight Beam Adjustment Retaining Screws
    G03092844Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals