LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing/Installing Control Module For Automatic Headlight Beam Adjustment >> Installation

Removing/Installing Control Module For Automatic Headlight Beam Adjustment: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lock the electrical plug connection and fasten the control module to the bracket.
  2. Install the right air guide and footwell bulkhead.
  3. Once installed, the control module must be coded and calibrated with the Porsche System Tester 2. After this, the main headlights must be readjusted with a commercially available 5 mm ball-head screwdriver.
scientia non olet · About LEMON Manuals