LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing/Installing Angle Sensor For Automatic Headlight Beam Adjustment >> Removal

Removing/Installing Angle Sensor For Automatic Headlight Beam Adjustment: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front underside panel.
  2. Hold intermediate link on rotary lever with second open-ended wrench and release. Push back the rubber cover over the electrical plug connection and remove electrical plug connection from the angle sensor.
    Fig 1: Holding Intermediate Link On Rotary Lever With Second Open-Ended Wrench
    G03092841Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Detach retaining bracket for angle sensor from the side member underneath.
    Fig 2: Detaching Retaining Bracket From Side Member
    G03092842Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Detach the angle sensor from the retaining bracket and remove it.
scientia non olet · About LEMON Manuals