Removing And Installing The Hazard Warning Light Switch: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Switch on the hazard warning light switch (button comes out).
On the sides of the button, there are small openings that project beyond the dashboard insert. Insert two small screwdrivers into the openings and pull off the button (A) toward the front. See Fig 1 .

Fig 1: Removing Hazard Warning Light Switch Button
Courtesy of PORSCHE OF NORTH AMERICA, INC.
The hazard warning light switch (B) is held in the dashboard insert by two locking hooks. See Fig 1 . Press the right locking hook toward the switch, grip the button holder with a pair of pliers and pull out the switch toward the front.