LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing And Installing Rear Angle Sensor For Automatic Headlight Beam Adjustment >> Removal

Removing And Installing Rear Angle Sensor For Automatic Headlight Beam Adjustment: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold intermediate link on rotary lever with second open-ended wrench and release. Push back the rubber cover over the electrical plug connection and remove electrical plug connection from the angle sensor.
  2. Undo both fastening screws on the bracket and remove angle sensor.
    Fig 1: Removing Angle Sensor For Automatic Headlight Beam Adjustment
    G03092843Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals