LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing And Installing Ignition Unit For Gas Discharge Lamp >> Removal

Removing And Installing Ignition Unit For Gas Discharge Lamp: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch off light. Disengage headlight housing and pull forwards a little.
  2. Disconnect the electrical plug connection of the automatic headlight beam adjustment (ALWR) take out headlight housing.
  3. Release cover with control module and open. Undo electrical plug connection on the gas discharge lamp (bayonet lock).
  4. Undo fastening screws (2 screws) on the ignition unit and take out ignition unit. Pull off electrical plug connection.
    Fig 1: Removing Ignition Unit For Gas Discharge Lamp Fastening Screws
    G03092837Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals