LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing And Installing Ignition Unit For Gas Discharge Lamp >> Installation

Removing And Installing Ignition Unit For Gas Discharge Lamp: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engage the electrical plug connection and fasten ignition unit on the headlight housing. The high-voltage came from the control module must be laid between the headlight housing and the ignition unit.
  2. Lock cover with control module and insert headlight housing into the wing.
  3. Engage the electrical plug connection of the automatic headlight beam adjustment and lock the headlight housing into the wing.
  4. Carry out a function check of the headlights.
scientia non olet · About LEMON Manuals