LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing And Installing Control Module For Gas Discharge Lamp >> Notes

Removing And Installing Control Module For Gas Discharge Lamp: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Warning signs (yellow triangle with black high-voltage arrow) indicate high voltage (risk of fatal injury).
  • The light should always be switched off when the components (control module, ignition unit, gas discharge lamp, drive motor) are removed and installed. A removed headlight does not have a high voltage. 
  • The gas discharge lamp (D2S lamp) should only be operated when installed in the reflector and in the installed headlight. 
scientia non olet · About LEMON Manuals