LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lights, Lamps, Switches) >> Removing And Installing Bulb For Additional Brake Light >> Removal

Removing And Installing Bulb For Additional Brake Light: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the convertible top until the convertible top compartment lid is fully open. Remove ignition key.
  2. Undo both fastening screws and remove the cover. Disconnect electrical plug connection and disengage all fastening tabs of the bulb holder.
    Fig 1: Disengaging Fastening Tabs Of Bulb Holder For Additional Brake Light
    G03092834Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Remove bulb holder and take out defective bulb.