LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Windshield Wipers And Washer) >> Removing And Installing Tank For Windscreen Washer System >> Installation >> 7 L Tank Or 3 L Tank

7 L Tank Or 3 L Tank

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. First push 7 l tank under the wing at front, then engage electrical plug connection of the pumps.
  2. Push tank rearward into the holder and engage the electrical plug connection for the fluid level indicator.
  3. Swivel the holder back (7 l tank) and fasten the tank. Tightening torque of the hexagon-head bolts:
    TIGHTENING TORQUE SPECIFICATIONS - WINDSHIELD WASHER

    M6 x 20 10 Nm (7.5 ft.lb)
    M8 x 35 20 Nm (15 ft.lb)
  4. Engage hose for the headlight cleaning system and carefully push on the hose for the windscreen washer system.
  5. Engage filler neck and fill in water. Perform a function test.
  6. Install wheel housing liner and mount the left front wheel (tightening torque 130 Nm (96 ft.lb)
scientia non olet · About LEMON Manuals