LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Windshield Wipers And Washer) >> Removing And Installing Spray Nozzle For Headlight Washing System >> Installation

Removing And Installing Spray Nozzle For Headlight Washing System: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push hose as far as it will go onto the new spray nozzle and fasten the hose clamp.
  2. Reinstall new spray nozzle with holder in the same position. Tightening torque of the M6 hexagon nut 5 Nm (3.5 ft.lb)
  3. Push plug-in coupling to lock with an audible click, then check the locking with a slight pull.
  4. Install main head headlight and check position of the spray nozzle in the cover trim. Remove the main head again and Centre the spray nozzle if necessary.
  5. Install main headlight, check it and perform a function test.
scientia non olet · About LEMON Manuals