Installing Display And Operator Control Unit (Pcm): Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- After installation of a new display and operator control unit, the system must be activated with the Porsche System Tester 2!
- Engage the electrical plug connections and carefully lay the electrical leads (do not pinch).
- Connect and switch on the Porsche System Tester 2.