LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Radio) >> Removing And Installing Display And Operator Control Unit (Pcm) >> Installing Display And Operator Control Unit (Pcm) >> Connecting And Switching On The PORSCHE System Tester 2

Connecting And Switching On The PORSCHE System Tester 2

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch ignition on.
  2. Switch on PCM by pressing the volume control (display remains dark).
  3. Establish communication with the Porsche System Tester 2 and select PCM.
  4. Select Modify coding.
  5. Select PCM active.
  6. Confirm PCM active with the F8 key.
scientia non olet · About LEMON Manuals