Removing and installing the expansion valve: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
- Do not remove plugs until shortly before installation. Replace O-rings and wet the new rings with refrigerant oil.
- Refrigerant oil removed by suction from a previously run air-conditioning system may no longer be used (special-category waste).
Tightening torques:
TIGHTENING TORQUESScrew M5 6 Nm Screw M6 9 Nm