Removing and installing outside temperature sensor: Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
- Remove footwell bulkhead and right-hand air guide. Remove drive motor for fresh-air/recirculation valve.
- Pull off electrical plug connection on the outside temperature sensor. Turn temperature sensor by 90° and pull it out.