LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Air Conditioner) >> Removing and installing outside temperature sensor >> Installation

Removing and installing outside temperature sensor: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place temperature sensor on the intake duct and turn by 90° (tighten).
  2. Engage electrical plug connection and route the wire carefully.
  3. Install drive motor for fresh-air/recirculation valve and perform a function test.