Removing and installing drive motors of the heating/air-conditioning unit: Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
- Remove footwell bulkhead and air guides. Unclip centre console cover at the front and remove the footwell vent (3 screws).
- Press pivot pin on the adjusting lever together and disengage the deflection lever.
- Unscrew drive motor of the heating/air-conditioning unit and disconnect the electrical plug connection.