Removing and installing blower driver: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
- Engage the electrical plug connection and slide the blower driver into the upper bracket.
- Tighten the fastening screw carefully (plastic housing). Install the air guide and footwell bulkhead.
- Perform function test on heater/fresh-air blower motor.