Tightening torques
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - ANTI-RUN-ON VALVE
| Location | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|
| Distributor housing hexagon-head bolt | M6 x 20 | 10 (7.5) |
| Air line hexagon-head bolt | M6 x 16 | 10 (7.5) |
| Air line union nut | M20 x 1.5 | 25 (19) |
| Oil filler neck hexagon-head bolt | M6 | 10 (7.5) |
| Throttle body hexagon nut | M6 | 10 (7.5) |
| Intake distributor hexagon-head bolt | M6 x 35 micro-encapsulated | 10 (7.5) |
| Fuel collection pipe hexagon-head bolt | M6 x 12 | 10 (7.5) |
| Secondary air pump hexagon nut | M6 | 10 (7.5) |
| Ground cable collar nut | M8 | 23 (17) |
| Generator hexagon-head bolt | M10 | 45 (33) |
| Air conditioning compressor hexagon-head bolt | M8 x 90/M8 x 120 | 23 (17) |
| Box for B+ connector hexagon-head bolt | M6 | 10 (7.5) |
| Maintenance cover hexagon-head bolt and hexagon nut | M6 | 10 (7.5) |
| Convertible-top compartment lid collar nut | M6 | 10 (7.5) |
| Torx screw for seat rail | M10 x 28 | 65 (48) |