LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Passenger Protection) >> Removing and installing triggering unit for airbag >> Installing triggering unit for airbag

Installing triggering unit for airbag

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The fastening points on the body must be metallically bright!
  • Use a 1/4 inch Allen key to tighten the shear-off nuts!
  • A new triggering unit must be locked after it has been installed!

Tightening torque of the M6 hexagon nut: 10 Nm (7.5 ftlb.) 

scientia non olet · About LEMON Manuals