LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Passenger Protection) >> Removing and installing roll-over bar >> Tightening torques

Tightening torques

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - ROLL-OVER BAR

Location Illustration Thread Tightening torque
Roll-over bar fastening screws on body -1-  . See Figure . M8 23 +/- 2 Nm (17 ftlb.)