LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Interior Equipment) >> Removing and installing windstop >> Installing locking bracket and holder

Installing locking bracket and holder

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installing locking bracket
    1. Position the left or right locking bracket -A-  on the roll-over bar and rivet in place with tubular rivets. See Figure .
  2. Installing holder.
    1. Position the holder -B-  on the roll-over bar and rivet in place with tubular rivets. See Figure .
scientia non olet · About LEMON Manuals