Overview of tools and materials
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
The following tools and materials are required for removal and installation of the rear window with 2-component adhesive:
COMPONENTS DESIGNATION (A, B, C, D, E, H)
| Item | Designation | Source | Remarks |
|---|---|---|---|
| -A- | |||
| -B- | |||
| -C- | |||
| -D- | |||
| -E- | |||
| -H- | Contains set components H1-H8 | ||
| Refer to ASSEMBLY INSTRUCTIONS FOR HARDTOP ASSEMBLY FIXTURE . |
COMPONENTS DESIGNATION (H)
| Item | Designation | Item | Designation |
|---|---|---|---|
| -H1- | Cleaning solution | -H5- | Cartridge, component A |
| -H2- | Primer | -H6- | Cartridge, component B |
| -H3- | Activator | -H7- | Mixing nozzle |
| -H4- | Swab | -H8- | Processing nozzle |