LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Glasses, Window Control) >> Removing and installing power window motor >> Installing power window motor

Installing power window motor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Guide power window motor through the loudspeaker cut-out and insert in the toothing. Tighten fastening pins of power window motor.
  2. Engage electrical plug connection.
  3. Push power window unit onto fastening pins.
  4. Tighten the three fastening nuts on the power window motor.
  5. Carefully glue the moulded foam part onto the inside of the door (protects against water leaking in).
  6. Install loudspeaker unit and door panel.
  7. Connect the battery.
scientia non olet · About LEMON Manuals