Materials and tools
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
MATERIALS AND TOOLS (ITEMS A & B)
| Item | Designation | Source | Remarks |
|---|---|---|---|
| -A1-A7- in Figure | |||
| -B- in Figure | Support cheek | 2 Multiplex plates 25 mm thick, 600 x 120 mm |
MATERIALS AND TOOLS (ITEM C & D)
| Item | Designation | Remarks |
|---|---|---|
| -C- in Figure | Swivel arm | 2 Multiplex plates 25 mm thick, 550 x 200 mm |
| -D- in Figure | Base plate | 1 wood-core plywood 19 mm thick, 1,500x900 mm |
| Drill | ||
| Drill diameter 6 mm and drill diameter 3 mm | ||
| Sabre saw | ||
| Tape measure |