Welding wheel housing, lower shell and outer side members into the body
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL HOUSING REFERENCE (WELDING)
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Plug-welding wheel housing/hinge pillar, front wall and cross member under shielding gas | Weld spare wheel housing with the fire wall -N, O-M-P, L- . See Fig 1 . |
| 2 | Spot-welding the wheel housing | Spot-weld the wheel housing to the outer side member -K- . See Fig 1 . |
| 3 | Welding the lower shell under shielding gas | Plug-weld the lower shell to the wheel housing -J, E, I- . See Fig 1 . |
| 4 | Welding outer side member under shielding gas and with spot welds | Spot-weld the outer side member with the inner side member -A, D, C-B- . See Fig 1 . |
| 5 | Welding inner/outer side members and front wall under shielding gas | Weld inner side member to outer side member -R-F- . See Fig 1 . |
| 6 | Welding side member/support shell under shielding gas | Weld side members to the support shell -G- . See Fig 1 . |