LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Brakes, Mechanical) >> Technical Data/Brake Wear Limit - BOXSTER >> Technical Data Wear Limit - BOXSTER

Technical Data Wear Limit - BOXSTER

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
WEAR LIMIT TECHNICAL DATA AND SPECIFICATIONS - BOXSTER

Designation   Note, dimensions Wear limit
Pad thickness front approx. 11.0 mm 2 mm
Pad thickness rear approx. 11.0 mm 2 mm
Brake disc thickness, new front 24 mm  
Brake disc thickness, new rear 20 mm  
Minimum brake disc thickness(1) after machining(1) front 22.6 mm  
Minimum brake disc thickness(1) after machining(1) rear 18.6 mm(1)  
Brake disc wear limit front   22.0 mm
Brake disc wear limit rear   18.0 mm
Peak-to-valley surface roughness of the brake disc after machining, max.   0.006 mm  
Thickness tolerance of the brake discs, max.   0.02 mm  
Lateral runout of the brake disc, max.   0.03 mm  
Lateral runout of the wheel hub, max.   0.03 mm  
Lateral runout of the brake disc when installed, max.   0.06 mm  
Pushrod play (measured at the brake pedal plate)   approx. 1 mm  
Parking brake (handbrake)   Drum brake acting mechanically on both rear wheels  
Parking brake drum   164 mm 165 mm
Brake shoe width   20 mm  
Brake pad thickness   3 mm 1 mm
(1) The brake disc must only be reworked symmetrically, i.e. from both sides evenly.