Removing And Installing The Rear Disc Brake Pads - BOXSTER S: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

It is essential to observe the following points when changing brake pads:
Use brake pads of the correct quality (in accordance with spare parts catalogue).
Replace vibration dampers each time the pads are changed.

Fig 1: Identifying Vibration Dampers

Courtesy of PORSCHE OF NORTH AMERICA, INC.

The damper plates have an adhesive protective film. The protective film must be pulled off before installation.
The pad backing plates (rear side of the brake pads) must not be greased.