Remarks On Measurement Sheet

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

In order for measured results to be documented, however, a copy of the alignment card shown above can be used. In practice this means that alignment cards cannot be ordered!
Alignment cards can be used for every Boxster and Boxster S.

Prepare copies of the corresponding alignment card shown.
Before measurement (test 1 through test 3), enter the general data, vehicle type (for example Boxster S) and the missing nominal values (new brake disc thickness/brake disc wear limit) into the copied alignment card.
NOTE: Actual values that are identical in all versions have already been entered!
Carry out measurements (actual status) and enter the values in the alignment card.
If brake discs are to be replaced, carry out Test 2, with the new discs again and enter the current values in a new alignment card.