Brake Discs - Measurement Sheet: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
BRAKE DISCS - MEASUREMENT SHEET (1 OF 2)
| Brake discs - Measurement | ||||
|---|---|---|---|---|
| Customer: | Rep. Order No.: | |||
| Street: | Vehicle Ident No.: | |||
| Place: | Licence number: | |||
| Telephone: | Date of first registration: | |||
| Odometer reading: km/miles | ||||
| Measurement made by: | ||||
| Vehicle type: | Date/signature: | |||
| Nominal values for: | ||||
| Test 1 = brake disc thickness | ||||
| - Brake disc thickness, new: | front___mm/rear___mm | |||
| - Wear limit: | front___mm/rear___mm | |||
| Test 2 = Lateral runout of: | ||||
| - Brake disc in vehicle | max.: 0.06 mm | |||
| - Brake disc removed | max.: 0.03 mm | |||
| - Wheel hub | max.: 0.03 mm | |||
| Test 3 = Thickness tolerance of brake disc | max.: 0.02 mm | |||
| Note on checking and measuring points, refer to MEASURING PREREQUISITES/MEASURING POINTS . | ||||
| Measuring values (Actual values) | front left [mm] | front right [mm] | rear left [mm] | rear right [mm] |
BRAKE DISCS - MEASUREMENT SHEET (2 OF 2)
| Brake discs - Measurement | ||||
|---|---|---|---|---|
| Test 1 Brake disc thickness (on 3 points, each offset by 120°, measure) - Measuring point A - Measuring point B - Measuring point C |
||||
| Test 2 Lateral runout (level runout) of: - brake disc in vehicle - brake disc removed - wheel hub |
||||
| Test 3 - Thickness tolerance of brake disc: (max. 0.02 mm permissible) |
||||