LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Anti-Lock Brake System) >> Important information about ABS 5.3 and ABS/TC 5.3 >> ABS/TC 5.3 (4-channel system) system description >> Switching off driving-stability control

Switching off driving-stability control

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Press the "TC OFF" logo of the rocker switch. Driving-stability control cannot be switched off during a TC control process (information light on). When doing so, operate the switch for at least 0.1 seconds. An additional 0.3 seconds will then pass until the routine is complete. Only then will driving stability control have been switched off or on.

One-sided wheelspin on the drive axle is further prevented by brake control up to a speed of 100 km/h. Driving stability is not monitored, since the drive wheels can start to spin at the same speed (slip).

With driving-stability control switched off, the TC warning light in the instrument panel and the indicator light in the rocker switch are lit.

It can be advantageous to switch off drive-stability control:

scientia non olet · About LEMON Manuals