Switching driving-stability control back on
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Press the indicator light in the rocker switch. When doing so, operate the switch for at least 0.1 seconds. An additional 0.3 seconds will then pass until the routine is complete. Only then will driving stability control have been switched off or on.
Driving-stability control cannot be switched on again during a TC control process (information light on).